Bigham Brothers Lilliston Rolling Cultivators: Standard Equipment

Tool Bars and Hitches
Massive Tool Bar 7 x 7" Main frame provides structural support for any combination of tool bar components. 1/4" or 3/8" wall tube (over 300") has capacity for any application.

Straight Hitch L500004066 Hitch is compatible with Category II or III Tractor Three Point. Simple design is compatible with cultivators set on narrow row space.	Offset Hitch L50004067 Offset Hitch works with Category II or III Tractor Three Point. Offset leg of hitch may be placed in four different positions on the tool bar to allow gang pipe placement for most row spacing.

	Heavy Duty Hitch L50015463 Hitch allows infinite spacing for any Category II or III tractor in combination with any Rolling Cultivator^® attachments. Heavy Duty Hitch is recommended for all cultivators equipped with folding tool bars and is also recommended for all tool bars over 300".

Optional Wide Support Hitch

L6499029 Hitch allows infinite spacing for any Category II or III tractor in combination with any attachments. Wide Support Hitch can be used with all cultivators equipped with folding tool bars and on tool bars over 300".

Gang Mounting Pipes

Gang Pipe, Mounting Bracket and Pressure Spring Assembly

L50012569, L50012570 Gang pipes are constructed from extra heavy wall pipe. Mounting bracket wraps around the tool bar for stability. Lower bushing for pivot bolt is 1/2" wall for dependable service. Ductile pivot clamp locates spider gang at any angle. Down pressure spring may be adjusted for each gang in order to penetrate hard, crusted soils. Gang mount pipe is assembled with zinc plated hardware for rust prevention.

Spider Gangs, Disc Gangs

P/N	No. Spiders	No. 1/2	Dia.	Hard Surfaced/ Plain	Approx Ship Wt. (Lbs.)
L50001039	5	1	16"	HS	87
L50001040	5	2	16"	HS	87
L50001037	4	1	16"	HS	70
L50001038	4	2	16"	HS	70
L50001035	3	1	16"	HS	55
L50001036	3	2	16"	HS	55
L6499007	5	1	16"	Plain	87
L6499008	5	2	16"	Plain	87
L6499005	4	1	16"	Plain	70
L6499006	4	2	16"	Plain	70
L2099029	4	1	14-1/2"	Plain	61
L2099030	4	2	14-1/2"	Plain	61

Heavy Duty Spider Gangs for your Crops and Soil Conditions

Rear slicer tine spider wheels are 16" in diameter and weigh approximately 12 pounds each. Weight and size are important to break hard, crusty soils into mulch, clearing weeds and grasses.

Bigham Brothers uses only high quality Link-Belt or Fafnir USA bearings with all spider gangs.
Gangs are available with Hard Surfaced wheels for extended life in abrasive soils. Red spider wheels are Hard Surfaced, black wheels are plain.
Spider gangs are assembled with plated bolts, flanges and axles for rust prevention.
Gangs are available in two, three, four and five spider assemblies with 16" spider wheels or 14-1/2" diameter spider wheels. The most popular gangs are listed.

Ridge Runner Disc Gangs

Rear disc gangs cut through heavy trash in reduced tillage, high residue crop conditions. 16" notched discs handle bulky residues and may be set at an aggressive angle for building ridges and beds.

P/N	No. Discs	No. 1/2	Dia.	Approx Ship Wt. (Lbs.)
L50010703	4	1	16"	86
L50010707	4	2	16"	86
L50010690	3	1	16"	70
L50010700	3	2	16"	70

Optional Equipment

Specifications