Bigham Brothers, Inc. Home Bigham Brothers Tillage Equipment, Lilliston Rolling Cultivators
Find A Dealer

Cultivating Accessories

Customize your cultivator with some of our more popular accessories to make the most of one pass through the field.

Hood Fender

Cultivator Hood FenderThe hood fender protects your young, tender crop while you cultivate at high speeds. The fender can be set completely on the ground for maximum protection or raised approximately 1" above the ground to push soil around the roots of small plants without covering the tops.

Standard Features:

P/N Description Shank Type Clamp Size Approx. Ship Wt.
815-501 Hood Fender Assy. Straight 4x4" 45 Lbs.
815-502 Hood Fender Assy. Offset-4" 4x4" 45 Lbs.
815-501 Hood Fender Assy. Straight 4x4" 45 Lbs.
815-502 Hood Fender Assy. Offset-4" 4x4" 45 Lbs.
Hood Fenders include 30" hood, pivot lugs, pivot bolts, upper shank and tool bar clamp as indicated.
Knifing Attachment for 1x3" Shank

Knifing Attachment for 1x3" ShankEquip any 1x3" cultivator shank with cultivator knives. This procudure cuts and scours bed sides for positive weed removal.

P/N Description Approx. Ship Wt.
713-160 Knifing Attachment; 1x3" Shank 16 Lbs.
Knifing attachments include knife bracket, two 1/2x2-1/2" mounting bolts with nuts, lock washers, and 5/8" set screw. Sweep, shank, and knives are pictured but not included.
Cultivating Ripper Shank Attachment

Cultivating Ripper Shank AttachmentMount the 1x3" height adjustable shank to penetrate middles and inter-row rip in one cultivation pass. Shank is cut from Formally material for abrasion resistance. Leading edge of shank is scarfed to reduce drag. Chromium carbide point has a long life even under abrasive conditions. Height adjustment feature makes this a perfect cultivator mounting option for a row crop reservoir tool such as the Adjustable Diker.

P/N Description Approx. Ship Wt.
709-007L Shank, Subsoil 1x3x34" LH 56 Lbs.
709-007R Shank, Subsoil 1x3x34" RH 56 Lbs.
Knifing attachments include knife bracket, two 1/2x2-1/2" mounting bolts with uts, lock washers, and 5/8" set screw. Sweep, shank, and kives are pictured but not included.
Cultivating Disc Coulters

Cultivating Disc CoultersTrash cutting coulters are the key to cultivator performance in high residue conditions. Disc coulters slice trash in line with a sweep or shovel. Bigham Brothers offers a selection of rigid tool bar mount coulters for virtually any cultivation application. Straight 1x3" mounting is simple and economical. Rear offset coulter mount increases trash clearance and height adjustment. Rigid coulters placed in each middle of a cultivator also serve to stabilize the unit for three point guidance applications. Tool bar mounting clamps are available for any size tool bar.

P/N Description Shank Type Clamp Size Shank Height Approx. Ship Wt.
841-300 Coulter Assembly Straight 4x4" 26-1/2" 65 Lbs.
841-325 Coulter Assembly R.O.S. 4x4" 29" 72 Lbs.
841-328 Coulter Assembly R.O.S. 4x4" 33" 74 Lbs.
Cultivating disc coulters include arm and hub as indicated, 20" Duraflute blade and 4x4" clamp assembly. Other blade and clamp sizes are available. Note: Rigid coulters may be subject to failure under normal conditions. Bigham Brothers does not cover rigid coulters under product warranty.

Parts List | Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.

Bigham Brothers, Inc. - P.O. Box 3338 - Lubbock, Texas 79452 - 806/745-0384 - Fax 806/745-1082 - Toll Free (U.S.): 800/692-4449