Planting
Preparation: Mounted Finishing Tools
Mounted
Finishing Tools attach to virtually any tillage implement to
condition the soil surface and prepare a seedbed. Four specific
varieties of rollers have been designed to attain desired surface
finishes to match your particular soil types and tillage
practices. As a general rule, each Finishing Tool firms the soil
surface, reduces hard surface clods and seals in moisture.
Finishing Tools feature a universal mounting system that attach
to virtually any size tillage frame and simple ratchet screw jack
depth adjustment.
Standard Features
- Wide selection of mount brackets to
fit any size tool bar.
- Mount assembly features ratchet jack
for quick and easy height adjustment.
- Modular Mount frame is constructed
from 4x4x3/8" tube.
- All finishing tools are equipped
with triple sealed greasable flange bearings.
Spiked Roller:
Mounted finishing tool (shown above)
equipped with 12-3/4" pipe and 3/8 x 2-1/2 x 3-1/2"
teeth arranged in a spiral pattern across the roller. Flat spikes
enhance positive rotation of the roller and partially mix surface
residue with fresh soil. This tool is popular behind a Paratill®
as a one pass preparation to plant wheat and other drilled crops.
Smooth Pipe
Roller:
 |
Large diameter (16") pipe
is used to construct the smoother roller. Larger pipe
rolls up and over uneven terrain to leave a smooth,
consistent surface. Surface residue may be flattened
without burying stalks. |
Basket (Spiral
Blade Crumbler):
| Spiral blades on mounted basket
aggressively engage the soil to break up clods, seal
moisture and even incorporate chemicals. Basket leaves a
surface condition to resist crusting and reduce soil and
water erosion. Eight blades are spread over a 16"
diameter to operate in moist soil conditions. |
 |
Cultipacker:
 |
Cast rings float on a pipe to
firm the surface over uneven coutours such as seedbeds.
Beds may be maintained and directional teeth on each ring
will pulverize clods and crimp stalks to the soil. |
Options:
- Choose the roller option that best
fits your desired field finish.
- Add mounting assemblies for
structural support if you wish to use any particular
roller as a depth support.
- Drag chain may be added for floating
linkage, or optional spring equipped adjusting jack may
be added for finishing tool protection.
- All finishing tools are available
with a pull package and hydraulic transport wheels.
Dimensions:
| Spiked
Rollers |
| P/N |
Frame Width |
Roller Width/Pipe Dia. |
# of Rollers |
# of Mount Arms |
Approx Ship Wt. |
| 887-400 |
14'9" |
86"/12-3/4" |
2 |
2 |
1260 Lbs. |
| 887-405 |
22' |
86"/12-3/4" |
3 |
3 |
1900 Lbs. |
| 887-410 |
29'6" |
86/12-3/4" |
4 |
4 |
2520 Lbs. |
| Mounted Spiked Rollers Include: 1.
Frame assembly with bearings and rollers as
indicated 2. Mounting brackets with assembly
hardware for 4x4" tool bar 3. Screw jack
assembly with hardware 4. Frame mount arm
(41") with mounting U-Bolts to attach frame.
Mounting assemblies are available for any
size frame. Please specify if frame mount is
required for other than 4x4" tool bar. |
|
 |
 |
| Smooth
Rollers |
| P/N |
Frame Width |
Roller Width/Pipe Dia. |
# of Rollers |
# of Mount Arms |
Approx Ship Wt. |
| 887-401 |
14'9" |
86"/16" |
2 |
2 |
1250 Lbs. |
| 887-406 |
22' |
86"/16" |
3 |
3 |
1875 Lbs. |
| 887-411 |
29'6" |
86/16" |
4 |
4 |
2500 Lbs. |
| Mounted Smooth Rollers Include: 1.
Frame assembly with bearings and rollers as
indicated 2. Mounting brackets with assembly
hardware for 4x4" tool bar 3. Screw jack
assembly with hardware 4. Frame mount arm
(41") with mounting U-Bolts to attach frame.
Mounting assemblies are available for any
size frame. Please specify if frame mount is
required for other than 4x4" tool bar. |
|
| Mounted
Baskets |
| P/N |
Frame Width |
Basket Blade Width/ Dia. |
# of Rollers |
# of Mount Arms |
Approx Ship Wt. |
| 887-402 |
14'9" |
86"/16" |
2 |
2 |
890 Lbs. |
| 887-407 |
22' |
86"/16" |
3 |
3 |
1350 Lbs. |
| 887-412 |
29'6" |
86/16" |
4 |
4 |
1780 Lbs. |
| Mounted Baskets Include: 1. Frame
assembly with bearings and baskets (spiral blade
crumblers) as indicated 2. Mounting brackets with
assembly hardware for 4x4" tool bar 3. Screw
jack assembly with hardware 4. Frame mount arm
(41") with mounting UBolts to attach frame.Mounting
assemblies are available for any size frame.
Please specify if frame mount is required for
other than 4x4" tool bar. |
|
 |
 |
| Mounted
Cultipackers |
| P/N |
Frame Width |
Roller Width/Ring O.D. |
# of Rollers |
# of Mount Arms |
Approx Ship Wt. |
| 887-403 |
14'9" |
86"/16" |
2 |
2 |
2300 Lbs. |
| 887-408 |
22' |
86"/16" |
3 |
3 |
3450 Lbs. |
| 887-413 |
29'6" |
86/16" |
4 |
4 |
4600 Lbs. |
| Mounted Cultipackers Include: 1.
Frame assembly with bearings, tube and rings as
indicated 2. Mounting brackets with assembly
hardware for 4x4" tool bar 3. Screw jack
assembly with hardware 4. Frame mount arm
(41") with mounting U-Bolts to attach frame.
Mounting assemblies are available for any
size frame. Please specify if frame mount is
required for other than 4x4" tool bar. |
|
Parts
Breakdown | Go back to our Home Page | Contact us: - Send
us a note, locate your nearest dealer, ask us a question or get
more information on our products.
