Find A Dealer

Special Application Hitches

A-Frame Hitches A-Frame hitches are designed for tool bars with no top mast. Category II hitch is suitable for tractors up to 100 HP. Combination hitch is suitable for tractors up to 150 HP.   Cat. II     Comb. II & III   Part # Bar Size Ship Wt. Part # Bar Size Ship Wt. 804-221 2-1/4" Dia. 120 Lbs. 804-224 2-1/4" Dia. 100 Lbs. 804-421 4 x 4" 120 Lbs. 804-441 4 x 4" 130 Lbs. 804-521 5 x 7" 145 Lbs. 804-541 5 x 7" 155 Lbs. 804-721 4 x 7" 140 Lbs 804-741 4 x 7" 150 Lbs.
Drop Hitches Drop Hitches provide extra ground clearance for implements with long frame attachments. Category III Drop Hitches feature slotted sleeves in order to lock the pin in position and include four 1" grade 5 bolts to mount each pull point. Category III Drop Hitches are standard equipment on Paratills®. Combination hitch is suitable for tractors up to 150 HP. Category III hitch is suitable for tractors up to 250 HP.   Category III   Comb. II & III     Part # Bar Size Ship Wt. Part # Bar Size Ship Wt. 804-448 4x4" 215 Lbs. 804-447 4x4" 210 Lbs. 804-748 4x7" 240 Lbs. 804-747 4x7" 235 Lbs. 804-548 5x7" 245 Lbs. 804-547 5x7" 240 Lbs. 804-778 7X7" 255 lBS. 804-777 7X7" 250 Lbs.
8" Drop Hitch 8" Drop hitch places pin positions well below the bottom side of the tool bar (8" from lower surface of frame to center of lower pin) for the highest clearance in applications. Part# Bar Size Ship Wt. 804-799 7x7" 195 Lbs.
Category IV Hitch Category IV hitches are designed for the largest, most powerful tractors (up to 300 HP). 2" Lower pins are locked with slotted sleeves. Top link is braced to diamond mast for three bar frames. Call for information concerning three point hitches for use with articulating tractors. Part# Bar Size Ship Wt. 804-744 4x7" 165 Lbs.
Split Hitches Split hitches straddle attachments which must be placed where lower pull points are usually mounted. Examples of this application are planter units, bed toppers and trash coulters for Paratills® on narrow row spacing. Extended split hitches place pin position 2" forward from standard position for additional clearance to mount clamps and other attachments. Combination II & III hitches are suitable for tractors up to 150 HP. Category III split hitches are suitable for tractors up to 200 HP.   Cat. II     Comb. II & III   Part # Bar Size Ship Wt. Part # Bar Size Ship Wt. 804-453 4x4" 100 Lbs. 804-450 4x4" 100 Lbs. 804-753 4x7" 120 Lbs. 804-742 4x7" 120 Lbs. 804-553 5x7" 120 Lbs. 804-550 5x7" 120 Lbs. 2" Extended - Cat III 4" Drop - Cat III 804-745 4x7" 145 Lbs. 804-454 4x4" 215 Lbs. 804-780 7x7" 155 Lbs. 804-741 4x7" 240 Lbs.

Special Application Hitches Parts Breakdown

Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.