|
|
|
|
| Ref.# | P/N | Description | Qty. Req./Assy (*Optional) |
| A. | 709-009 | SHANK, MEGATILL 36" POINT/SHIN | |
| 1. | 380-709 | SHANK, MEGATILL 36" (BARE) | 1 |
| 2. | 709-015 | SHIN, CRHOM. CARB. 1-1/8X16-1/4" | 1 |
| 3. | 709-014 | POINT, RIPPER CHROMIUM CARBIDE | 1 |
| 4. | 617-052 | ROLL PIN, ZP 3/8X2" | 1 |
| 5. | 602-0607Z | BOLT, HCS ZP GR5 3/8 x 1-3/4" | 1 |
| 6. | 613-0600Z | NUT, HEX NYLOCK ZP 3/8" | 1 |
| 7. | 616-0600Z | WSHR, FLAT ZP 3/8" | 2 |
| KNIVES (OPTIONAL EQUIPMENT) | |||
| 8. | 630-427 | KNIFE, RH 24" 3/8 X 4" RIPPER | * |
| 9. | 630-426 | KNIFE, LH 24" 3/8 X 4" RIPPER | * |
| 10. | 602-0810Z | BOLT, HCS ZP GR5 1/2 X 2-1/2" | * |
| 11. | 611-0801Z | NUT, HEX ZP 1/2" | * |
| 12. | 615-0800Z | WASHER, LOCK ZP 1/2" | * |
| 13. | 616-0800Z | WASHER. FLAT ZP 1/2" | * |
| B. | 709-008 | SHANK, MEGATILL 30" POINT/SHIN | |
| 380-708 | SHANK, MEGATILL30" (BARE) | 1 | |
| C. | 806-056 | CLAMP ASSY., 2 BAR 25" REINFORCED | |
| 14. | 636-955 | CLAMP SIDE, 2 BAR 25" REINFORCED | 2 |
| 15. | 610-1418Z | **SHEAR BOLT, ZP 7/8 X 4-1/2" | 1 |
| 16. | 602-1418Z | BOLT, HCS ZP GR5 7/8 X 4-1/2" | 1 |
| 17. | 610-0035 | U-BOLT, 7/8" FOR 4X4 BAR | 4 |
| 18. | 613-1400Z | NUT, HEX NYLOCK ZP 7/8" | 2 |
| 19. | 611-1401Z | NUT, HEX ZP 7/8" | 8 |
| D. | 806-057 | CLAMP ASSY, 4X7 FRT./BACK REINF. | |
| 20. | 636-956 | CLAMP SIDE, 2 BAR 4X7 REINF. | 2 |
| 21. | 628-308 | CAP, 7" BAR 1" BOLT HOLE (CAST) | 4 |
| 22. | 601-1426Z | BOLT, HCS ZP 7/8 X 6-1/2" | 8 |
| TOOL BARS | |||
| 700-055 | SUPERBAR II, 5 ROW 2 BAR 25" | ||
| 700-075HD | SUPERBAR II, 7 ROW 2 BAR 25" W/H.D. OPT. | ||
| 700-095HD | SUPERBAR II, 9 ROW 2 BAR 25" W/H.D. OPT. | ||
| 702-905 | SUPERBAR II, 5 ROW 2 BAR 4X7 FRT/BACK | ||
| 702-907 | SUPERBAR II, 7 ROW 2 BAR 4X7 FRT/BACK | ||
| 702-909 | SUPERBAR II, 9 ROW 2 BAR 4X7 FRT/BACK | ||
| 704-055 | TOOL BAR, 4 BAR 12.5/12.5/25" CTRS. 5 ROW | ||
| 704-075 | TOOL BAR, 4 BAR 12.5/12.5/25" CTRS. 7 ROW | ||
| 704-095 | TOOL BAR, 4 BAR 12.5/12.5/25" CTRS. 9 ROW | ||
| MORE TOOL BAR INFORMATION | |||
| HITCHES | |||
| 804-448 | HITCH ASSY., CAT III WIDE 4X4 (4" DROP) | ||
| 804-748 | HITCH ASSY., CAT III WIDE 4X7 (4" DROP) | ||
| MORE HITCH INFORMATION | |||
| COULTERS | |||
| 841-100 | COULTER ASSY., SPRING LOADED SWIVEL (4X4BAR) | ||
| MORE COULTER INFORMATION | |||
| ** Warning! Bigham Brothers specialized shear bolt must be used for any product warranty to apply. | |||
Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.
