Bigham Brothers, Inc. Home Bigham Brothers Tillage Equipment, Lilliston Rolling Cultivators
Find A Dealer

Rigid Frame Strip Till

Rigid Frame Strip Tillage ToolProduce a controlled crop environment by tilling, applying fertilizer and preparing a seedbed in one trip with the Bigham Brothers Rigid Frame Strip Tillage Tool. Companion to our Super Duty Strip Till, this tool is perfect for operations on circles and contours. It gives you the advantages of precision applied tillage zones to remove compaction and hardpan, while leaving traffic zones firm. Our Strip Tillage Tool also concentrates tillage in a specific area to leave protective residue strips intact in a reduced tillage crop environment.

Bigham Brothers Strip Tillage Tool tills the soil for better crop growing conditions and increased water holding capacity, firms and prepares seedbeds for optimum planting results and allows for placement of fertilizer and herbicides. This tool was designed to comply with federal conservation guidelines while providing the advantages of combined field operations to reduce field trips.

Equipment Features:

Strip Till Tooling Features

Front Swivel Coulter:

  • Hinge and spring assembly provide up to 1200 pounds of residue slicing pressure.
  • Strong ductile cast pivot body is equipped with grease zerks for vertical and horizontal pivots.
  • Available with 20” and 17” fluted blades.

Super Duty Row Cleaner:

  • New notched blades clear residue in front of the tillage shank.
  • Heavy duty hubs with two disc bedder bearings stand up to tough soil conditions.

Rear Basket:

  • Largest diameter basket on the market.
  • Basket weldment features 1-1/2” shaft and flange bearings with triple lip seals.
  • Seals moisture, breaks up clods and prepares the seedbed.

XHD Gauge Wheels:

  • Keep the load off your draft and your working depth consistent.
  • Mount bracket is made from heavy 3/4” plate steel and wraps almost completely around the tool bar.
  • The arm is made from 4x4” 1/4 inch steel tubing.
  • Hub, Spindle and wheel assembly is rated at 3500 pounds capacity, singles, and 7000 pounds, duals.
  • The screw jack has 1-1/4” Acme thread screws. All adjusting parts are plated for rust prevention.

Tillage Shank Options:

  • Wide variety of shanks to match your tillage and application requirements.
  • J-Till™ angled-leg shank provides maximum tillage and sets off the row center to prevent slotting.
  • 1x4” Ripper shank for tillage under the row.
  • Mole knives are available with standard wear cap items and optional heavy duty caps and tube protector shins.
  • Exclusive ‘trash flow’ knives with unitized shanks.

Rear Tillage Discs:

  • Choose the disc option that matches your Strip Till preference. Penetrate the tillage zone, create a berm or use disc bedders to throw up a bed.
  • Tillage discs are mounted on flat shanks with a positive hexagon angle adjustment feature.
  • Each blade is adjustable vertically and laterally on the tool bar.

Tooling Options

Rigid Frame Strip Till Options With Assorted Ripper Shanks

Covering Discs, Mole Knife, 1x4 ripper Shank, J-Till Shank, HD Row Cleaners, Swivel Coulters

Extra Heavy Duty Gauge Wheels
841-170 Gauge Wheels, 4x7” 20.5x8”
1 pair gauge wheels with heavy duty turnbuckle and single wheel.
805-207 GW 4x7 Turnbuckle 20.5x8
1 pair gauge wheels with heavy duty turnbuckle and 20.5x8” tire. Fits under the frame as shown at left.
   
Spring Loaded Swivel Coulter Offset Spring Loaded Swivel Coulter
841-170 Coulter Assy HD 20” Blade 4x7”
Includes blade, hub, pivot body, clamps, and shank.
841-175 Coulter Assy HD 20” Offset
Includes blade, hub, extended spindle, pivot body, clamps, and shank.
Heavy Duty Row Cleaners Light Duty Row Cleaners
712-660 Row Cleaner Assy, SD LH 1x3”
712-661 Row Cleaner Assy, SD RH 1x3”
806-473 Clamp Assy. 4x7” For 1x3” Shk

Super Duty Row Cleaners include LH or RH mount shank as listed and one pair of notched disc hub and bearing assemblies.
712-200 Row Cleaner Assy, LH 1x3”
712-201 Row Cleaner Assy, RH 1x3”

806-473 Clamp Assy. 4x7” For 1x3” Shk
Light duty row cleaners include LH or RH mount shank and one pair of notched disc hub and bearing assemblies.

 

Mole Knife Ripper Shank with Fertlizer Tube 1x4 Ripper Shank with Fertilizer Tube J-Till Leg - Ripper Shank with Fertilizer Tube
806-207 Fertilizer Shank Asssy. 4X7
Includes shank, clamp, knife assembly, and fertilizer tube.
709-024 Shank 1x4x35.5” w/Tube
806-407 Clamp, 4x7” For 1x4 (Breakaway)

Shank assembly includes shank, point, wear shin, and fertilizer tube.
709-022L J-Till Leg, LH 1X4
709-022R J-Till Leg, LH 1X4
806-407 Clamp, 4x7” For 1x4 (Breakaway)

Leg assembly includes shank, point, wear shin, and fertilizer tube.
     
Fluted Covering Disc Bundle Wavy Covering Disc Bundle Heavy Duty Disc Hiller Bundle
889-524 Covering Disc Bundle, 16” HD
Includes one pair disc gangs with housing, bearings, arbor bolt, 16” fluted blades and 4x7” mounting clamps.
889-519 Covering Disc Bundle, 17” HD
Includes one pair disc gangs with housing, bearings, arbor bolt, 17” wavy blades and 4x7” mounting clamps.
812-457 Disc Hiller Assy, 1X3 Mnt 4X7”
Disc Hiller Bundle includes one pair disc gangs with housing, bearings, arbor bolt, 20” fluted blades and 4x7” mounting clamps.
     
  Rolling Basket Bed Conditioners  
  889-447 Basket Bundle, 17” Wide/16” Diameter
Basket bundle includes yoke/basket assembly with bearings, mount arm and spring assembly.
 

 


Go back to our Home Page | Super-Duty StripTill | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.


Bigham Brothers, Inc. - P.O. Box 3338 - Lubbock, Texas 79452 - 806/745-0384 - Fax 806/745-1082 - Toll Free (U.S.): 800/692-4449