Bigham Brothers, Inc. Home Bigham Brothers Tillage Equipment, Lilliston Rolling Cultivators
Find A Dealer

Super Duty StripTill

Super Duty StripTill on Folding FrameBigham Brothers introduces our all new Super Duty Strip Tillage Tool. Row unit mounts to 4x7 or 7x7” tool bar. Rear gang is welded from structural tube and may be equipped with virtually any combination of attachments.

This tool provides you with the advantages of precision applied tillage zones to remove compaction and hardpan, while leaving traffic zones firm. Use this rugged tail gang and equip it in virtually any configuration on the following types of tool bars:

Customize your StripTill with the following accessories:

Get your strip tillage field advantage with Bigham Brothers Super Duty Strip Tillage Tool.

Bigham Brothers Super Duty Strip Tillage Tool tills the planting strips for better crop growing conditions and increased water holding capacity, firms and prepares the seedbed for optimum planting results and allows for placement of fertilizer and herbicides. This tool is designed to handle large amounts of crop residue while providing the advantages of combined field operations to reduce field trips. Field After Strip Tillage Operation - Ready for Planting
Strip-Till Row Unit - Sample Configuration

Super Duty StripTill

Gang Features
Parallel Linkage:
  • 1” Diameter Pivot Bolts, not 5/8 or 3/4”
  • Plastic wear bushings keep the linkage assembly tight and do not require grease.

Front Coulter:

  • . 1-1/8” Arbor Bolt
  • Two heavy 208 series domestic sealed bearings in each coulter hub
  • Adjust coulter depth with easy adjusting handle.

Gang Operating Features:

  • Optimized tool spacing. Maximum trash and soil flow between tillage components is based on four years field experience.
  • Only three grease zerks per row. Greasing interval is once each operating season.
 Row Cleaner:
  • Patented notch design is effective in clearing residue in front of the tillage shank.

Tillage Shank Options:

  • Stunning variety of shanks to match your tillage and application requirements.
  • Mole knives are available with standard wear cap items and optional heavy duty caps and tube protector shins.
  • Exclusive optional angled leg tillage. Not available on any other strip tillage unit.
  • Heavy optional shanks to meet deeper tillage and application requirements.
  • Exclusive ‘trash flow’ knives with unitized shanks.
 Rear Basket:.
  • Largest diameter basket on the market.
  • Basket weldment features 1-1/2” shaft and flange bearings with triple lip seals.
  • Seal moisture, break up clods and prepare the seedbed.

Rear Tillage Discs:

  • Choose the disc option that matches your StripTill preference.
  • Penetrate the tillage zone, create a berm or use disc bedders to throw up a bed.
  • Tillage discs are mounted on flat shanks with a positive hexagon angle adjustment feature.
  • Each blade is adjustable vertically and laterally on the toolbar.

Super Duty StripTill

Tooling Options

 Super Duty Strip Till Row Unit - Tooling Options
  789-210 Gang Bundle, Super Duty StripTill
Gang bundle includes primary tube, linkage assembly and mount kit for 7x7” bar. Complementary tooling is pictured but not included. 889-208 Basket Bundle, 17” Wide/16” Diameter Basket
Super Duty Strip Tillage Coulter   Strip-Till Row Cleaners  
789-300 Coulter Bundle,20”
Front coulter bundle includes coulter blade with depth bands, hub assy. with bearings, arbor bolt and mount yoke.		   712-200 Row Cleaner Assy, LH 1x3” Mount
712-201 Row Cleaner Assy, RH 1x3” Mount
Row cleaners include LH or RH mount shank as listed and one pair of notched disc hub and bearing assemblies.		  
Strip-Tillage Chopper   Subsoil Shank for StripTill  
789-316 Chopper Bundle,17” Wide
Front chopper bundle includes chopper reel with blade sand mount yoke assy. with bearings.		   709-020L Shank, Subsoil 1x3x34” LH
709-020R Shank, Subsoil 1x3x34” RH		  
Strip Tillage Fertilizer Shank   HD Subsoil Shank - Strip-Till  
630-716 Mole Knife/Shank (Trash Flow) Sgl.
630-721 Mole Knife/Shank (Trash Flow) Dbl.		   709-024 Shank/Point/Shin 1x4” HD  
Strip-Till Bent Shank J-Till Bundle   Fertilizer Shank and Knife Assembly - Strip Tillage Tool  
889-460 J-Till Bundle, LH
889-461 J-Till Bundle, RH
J-Till bundles include shank, point and shin bent right or left as indicated, with shear bolt protected clamp to fit rear tillage disc tooling tube.		   789-292 Fert. Shank/Knife Assy.  
StripTill Disc Hillers   Wavy Disc Hillers For Strip-Till  
889-516 Tillage Disc Bundle, 16” Concave
Tillage disc bundles include one pair shank, hub and disc assembly, two mounting clamps with 30” tooling tube (4x4).		   889-517 Tillage Disc Bundle, 17” Wavy  
Fluted Disc Hillers - Strip Tillage Tool   StripTill Bed Conditioner  
812-454 Heavy Disc Hiller Bundle
Disc hiller bundles include one pair disc gang with housing, bearings, arbor bolt, 20” fluted blade and mounting clamps with 30” tooling tube (4x4).		   889-208 Basket Bundle, 17” Wide/16” Dia.
Basket bundle includes yoke/basket assembly with bearings, mount arm and spring assembly.		  
Strip-Till - Smooth Roller      
889-602 Roller Bundle,
16” Wide/12-3/4” Dia.
Roller bundle includes drum/basket assembly with bearings, mount arm and spring assembly.

Optional Scraper:
886-986 Scraper Kit, 16” Roller
Scraper kit includes blade, mounting brackets and all required hardware.

      

 

 

Component List | Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.

Bigham Brothers, Inc. - P.O. Box 3338 - Lubbock, Texas 79452 - 806/745-0384 - Fax 806/745-1082 - Toll Free (U.S.): 800/692-4449