|
|
|
|
Winged
Sweep for PrepMaster® Winged
sweep is a perfect complementary ground engaging tool for
the PrepMaster. Lower share will knock off the top of
each bed at a consistent height and will move stalks and
residue into furrows.Cultivator
Sweeps
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chisel Sweeps
Chisel sweeps are suitable for most chisel plows
(Bigham Brothers, Glencoe, Krause, Anderson, Melroe, Graham 600
series, Bush Hog and most others.) This chisel sweep has a 50
degree stem angle with 7/16" bolt holes on 2-1/4"
centers. Some sizes listed are available with hard facing for
longer wear. See Chisel Plow for
more information.
| Ref. | P/N | Thickness x width (W) | Approx Ship Wt. |
| J. | 637-012 | 1/4 x 12" | 4.6 |
| 637-014 | 1/4 x 14" | 5.0 | |
| 637-016 | 1/4 x 16" | 6.0 | |
| 637-018 | 1/4 x 18" | 7.0 | |
| 637-020 | 1/4 x 20" | 7.6 | |
| 637-024 | 1/4 x 24" | 9.2 | |
| 637-026 | 5/16 x 26" | 15.3 | |
| 637-350 | Bolt, Nut & Washer Pack, Chisel Sweep | .25 | |
| Bolts Required: | Qty. | ||
| 608-0710Z | Bolt, Plow 7/16x2-1/2" | 2 Per Sweep | |
Stubble Mulcher Sweep (42")
Standard blade will fit all Bigham Brothers'
Mulcher Plows. Tip of sweep is hardfaced.
| Ref. | P/N | Description | Size | Ship Wt. |
| P. | 709-005 | Blade, Mulcher 42" Plain | 9/32 x 4" | 18 |
| Bolts Required: | Qty. | |||
| 608-0605Z | Bolt, Plow 3/8x1-1/4" | 8 Per Sweep | ||
Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.
Sweeps are
suitable for use with any stiff shank cultivator. All
sweeps are constructed from heavy 1/4" material for
long wear. Mounting crown will conform and wrap around
our cast foot pieces. For more information see