|
|
|
|
Break up
compaction without destroying soil structure in narrow row spaced
crops. The Bigham Brothers TerraTill® bends
subsoil to remove hardpans. The TerraTill® was
developed using the same Leg design principles that have made the
Paratill® successful, but provides a narrower loosened
zone. In average field conditions each TerraTill®
Leg loosens a zone approximately 12" to 18" wide up to
a 17" operating depth. Reduction in the width of the
loosened zone results in a better maintained firm traffic lane in
narrow space row crops.
High clearance TerraTill®
legs provide frame clearance for deep soil penetration. Four, Six
and Eight Leg machines are equipped with coulters for operation
in heavy residue. Rear bedding tools on the TerraTill®
frame may combine deep tillage and ridging or bedding in the same
pass to save trips across the field.
 |
Paratill® has broven successful for zone loosening soil on wide row spaces in a stale seedbed system. On narrow row spacing, the loosening action of the Paratill® may extend from leg to leg across the traffic lane. This can reduce or eliminate firm furrows to support traffic in a stale seedbed system. |
 |
TerraTill® loosens a more narrow zone to allow maintenance of a firm traffic lane in row spaces from 30" to 32". TerraTill® fits well with narrow row space cotton (particularly on a stale seedbed) as well as corn, milo, soybeans and other crops traditionally produced on narrow rows. |
 |
Six leg TerraTill® equipped with coulters and rear bedding tools. |
Standard Features:
| P/N | Description | No. of Coulters |
Useable Tool Bar Length |
Qty. Rear Shanks |
Approx. Ship Wt. |
| 907-124 | TerraTill®, 4 Leg with Coulters | 4 | 14' 6" | - | 3350 Lbs. |
| 907-126 | TerraTill®, 6 Leg with Coulters | 6 | 16' 8" | - | 4220 Lbs. |
| 907-128 | TerraTill®, 8 Leg with Coulters | 8 | 22' | - | 5100 Lbs. |
| 907-134 | TerraTill®, 4 Leg with Coulters & Rear Shanks | 4 | 14' 6" | 5 | 3670 Lbs. |
| 907-136 | TerraTill®, 6 Leg with Coulters & Rear Shanks | 6 | 16' 8" | 7 | 4710 Lbs. |
| 907-138 | TerraTill®, 8 Leg with Coulters & Rear Shanks | 8 | 22' | 9 | 5740 Lbs. |
TerraTills® include: Toolbar (three bar Superbar II) with 4 x 7" front tube, Cat. III Hitch Assy., corresponding quantities of Legs with frame mounting clamps, spring loaded swivel coulters, gauge wheels (underframe gauge wheels with all units, two sets of gauge wheels for eight Leg TerraTills®), parking stands and 1 x 3" rear offset shanks with clamps to mount bedding tools on the rear bar as indicated. Note: Standard tool bar is engineered for 30" and 32" rows, please specify if an alternative row space is required. Lister Bottoms are not included. All units are prices unassembled, F.O.B. Lubbock, Texas.
New! The Bigham Brothers One Pass Terratill® buries stalks, tills, and creates raised beds in a single trip!
TerraTill® Parts List | Go back to our Home Page | Contact us: - Send us a note, locate your nearest dealer, ask us a question or get more information on our products.
